|
INNOVATIVE CATALYTIC AND PETROCHEMICAL
TECHNOLOGY.SCIENTIFICALLY DOCUMENTED TO HELP:
 |
IMPROVE
PERFORMANCE |
|
REDUCE FUEL CONSUMPTION
|
|
IMPROVE OCTANE RATING |
|
REDUCE KNOCKING, PINGING AND DIESELING |
|
IMPROVE VALVE LUBRICATION |
|
REDUCE CARBON AND EXTEND PLUG LIFE |
|
IMPROVE MOISTURE MANAGEMENT |
|
REDUCE EXCESSIVE EMISSIONS |
MPG-BOOST™ combustion catalyst
technology has been developed and proven with over 20 years of landmark
research and 302 million miles of highway/city testing.
MAXIMUM PERFORMANCE WITH CATALYTIC TECHNOLOGY
MPG-BOOST™ utilizes a unique combustion catalyst developed
from aerospace technology. Found only in
MPG-BOOST™ the catalyst accelerates the actual rate at
which fuel combines with air in the combustion chamber. This results in a
significant increase in the burn-rate of the fuel.
IMPROVED PERFORMANCE is achieved through the
increased rate of combustion. The process intensifies the pressure on the
pistons and directly increases power output.
REDUCED FUEL CONSUMPTION can result when the
catalytic effect is not used by the driver for extra power. In scientifically
controlled laboratory and highway /city testing, a 10% improvement in fuel
economy has been consistently documented.
IMPROVED OCTANE RATING is a
significant benefit to users with high-performance or older cars. Laboratory
tests have shown that 2 or 3 ounces of MPG-BOOST™ in 20
gallons of regular unleaded gasoline raised the octane rating by one full
point.
REDUCED CARBON DEPOSITS on the spark plugs,
piston face, rings and valves, are also a result of the combustion catalyst. By
reducing the ignition temperature of the carbon, the catalyst causes it to be
consumed in combustion, thereby extending plug life and reducing engine wear
|
|
REDUCED KNOCKING, PINGING AND DIESELING are
achieved through the reduction of the carbon deposits and the increased octane
rating, both caused by the consistent application of the catalyst.
REDUCED EXCESSIVE EMISSIONS result from the
accelerated combustion process, which allows more of the fuel to be consumed
prior to the exhaust valves opening.
MAXIMUM PERFORMANCE WITH PETROCHEMICAL TECHNOLOGY
MPG-BOOST™ combines the technology of an aerospace catalyst
with additional petrochemical elements. These essential elements include: a
detergent; gum; varnish and water dispersants; antirust agents; upper cylinder
lubricants; and fuel stabilizing components. These combine to enhance the
purity and stability of all grades of gasoline. This translates into improved
fuel system performance, extended time between tune-ups, and reduced frequency
of expensive carburetor overhauls.
IMPROVED VALVE LUBRICATION is accomplished
through the overall lubricity of the carrier, used in the formula. Combined
with the reduction in carbon deposits in the upper cylinder, this property
promotes smoother engine operation and extended life.
IMPROVED MOISTURE MANAGEMENT is achieved by
maintaining a proper delicate balance of moisture to fuel. Condensation already
present is suspended in small particles, allowing it to pass safely through the
system where it can be utilized to enhance the combustion process. Conversely,
MPG-BOOST™ effectively releases excess water present in bulk
storage, so that it drops harmlessly to the bottom of the tank.
DIRECTIONS FIRST TIME USE:
Use 4 ounces of MPG-BOOST™ per each
12-20 gallons of fuel for the first 120 gallons of the total fuel used.
CONTINUED USE: Continue using 1 oz of MPG-BOOST™
per each 12-22 gallons of fuel used.
WARNING: Do not exceed Directions for use or
over use product.
|